3 inch wafer

Short Name:

The following is a list of equipment where 3 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
SPTS uetch vapor etch uetch	SPTS uetch vapor etch Training	All	SNF Cleanroom Paul G Allen L107	Pieces need a carrier wafer; Isotropic Etching
Sensofar S-neox s-neox	Sensofar S-neox Training	All	SNF Cleanroom Paul G Allen L107	non contact 3D optical profiling
Heidelberg MLA 150 - 2 heidelberg2	Heidelberg Training	All	SNF Cleanroom Paul G Allen L107	Direct Write
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist as mask allowed
HMDS Vapor Prime Oven, YES yes	YES Prime Oven Training	All	SNF Cleanroom Paul G Allen L107	Two programs: Singe and HMDS prime or Singe only. No Resist allowed!
Tencor P2 Profilometer p2	Tencor P2 Profilometer Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107	Step height measurement range 500 Å to 80 µm
Samco PC300 Plasma Etch System samco	Samco Training	Flexible	SNF Cleanroom Paul G Allen L107
Fiji 2 ALD fiji2	ALD Fiji 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.
Oven (White) white-oven	White Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	For LOL2000 bake or bakes which are not allowed in the other ovens and need higher temperatures, up to 200C, programmable.
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Cleanroom Paul G Allen L107	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
Fiji 3 ALD fiji3	ALD Fiji 3 Training	Flexible	SNF Cleanroom Paul G Allen L107	Restricted to non-conductive films only
Wet Bench Flexible Solvents 1 wbflexsolv-1	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, two ultrasonic baths.
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	Convection in N2. Cure. Programmable.
Prometrix Resistivity Mapping System prometrix	Prometrix Training	All	SNF Cleanroom Paul G Allen L107	3 Probe Heads for different cleanliness groups.
AJA2 Evaporator aja2-evap	Evaporator AJA2	Semiclean	SNF Cleanroom Paul G Allen L107	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
MVD mvd	MVD Training	Flexible	SNF Cleanroom Paul G Allen L107	Reactor located inside glovebox
Wet Bench Flexible Solvents 2 wbflexsolv-2	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, hot plate
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Flexus 2320 Stress Tester stresstest	Stress Tester Flexus 2320 Training	All	SNF Cleanroom Paul G Allen L107

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Deposition		Flexible				poly(p-xylylene)					Pieces 2" 3" 4" 6" 8" Cones Disks Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)
Plasmaetch PE-50 plasma-etch	Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist						78% N₂, 21% O₂, ~1% Ar		Pieces 2" 3" 4" 6"		Multiple
Profilometer Alphastep 500 alphastep	Characterization > Surface Analysis > Profilometer > Step Profile		Flexible									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Profilometer AlphaStep D-300 alphastep2	Characterization > Surface Analysis > Profilometer > Step Profile		Flexible									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
Prometrix Resistivity Mapping System prometrix	Characterization > Sheet Resistance Measurement		All									2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
RTA AllWin 610 aw610_l	Annealing & Oxidation > Rapid Thermal Annealing	Pre-Diffusion Clean	Clean					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	1 wafer
RTA AllWin 610 aw610_r	Annealing & Oxidation > Rapid Thermal Annealing		Flexible					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI			20 ºC		CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia	24 °C - 250 °C		N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy		All			0.00 mm - 35.00 mm					6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible									Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂						C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Thermco3 Oxidation Furnace thermco 3	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂	700 °C - 1100 °C		H₂ N₂ O₂		Pieces 2" 3" 4" 6"		50
Tylan9 Forming Gas Anneal Furnace tylan9	Annealing & Oxidation > Annealing (furnace)		Flexible				SiO₂	250 °C - 1100 °C		10% H₂ in N₂ Ar H₂ N₂ O₂		Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2)	50
Tylanfga Forming Gas Anneal Furnace tylanfga	Annealing & Oxidation > Annealing (furnace)	Standard Metal Clean	Semiclean			100.00 Å - 100.00 Å		250 °C - 800 °C		10% H₂ in N₂ Ar N₂		Pieces 2" 3" 4"		50
Wet Bench Clean 1 wbclean-1	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean 2 wbclean-2	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF 6:1 BOE SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean_res- hotphos wbclean_res-hotphos	Etching > Wet Etching > Silicon Nitride Wet Etching		Clean	Si3N4					H₃PO₄			3" 4" 6"	(Si) , (SiGe) , (SiO2)