Skip to content Skip to navigation

Equipment Training Overview

All training is being re-vamped to incorporate New Normal policies- stay tuned for updated training procedures. 

Some tools will have group trainings that are regularly scheduled that can be found on the Training Calendar. Others will be scheduled as requested. If you have any questions, please feel free to contact the staff person listed for the equipment.

If you are not sure which piece(s) of equipment you need, you can review the equipment-specific information or go to the ProcessesTechniques, or Materials sections which offer comparisons of process capabilities for most tools.

You are also welcome to consult with one of our Technical Liaisons, attend a Process Clinic, or reach out to any of the contacts listed for each tool.

Please note: In order to schedule training, you must be an active SNF labmember

Training fees are fixed and charged in units of hours, which reflect the average time for a training session (actual time spent will vary). The current training rate is listed in the SNF Lab Fees page.

Partial words okay.
Badger ID Training Link Training Charges Lab Organization Location
oven110 110°C Oven Training
SNF
SNF Cleanroom Paul G Allen L107
oven90 90°C Oven Training
SNF
SNF Cleanroom Paul G Allen L107
afm-asylum AFM-Asylum Training 4.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
aix-ccs Aixtron MOCVD - III-N system training 4.00 hours
SNF
SNF MOCVD Paul G Allen 213XA
aix200 Aixtron MOCVD - III-V system training 4.00 hours
SNF
SNF MOCVD Paul G Allen 213XA
aixtron-graphene Aixtron Black Magic graphene CVD furnace training 1.00 hours
SNF
SNF Exfab Paul G Allen L119 Año Nuevo
aja-evap AJA Evaporation training 1.00 hours
SNF
SNF Exfab Paul G Allen 155A Venice
aja2-evap AJA2 Evaporator 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
alphastep Alphastep 500 Profilometer Training 0.25 hours
SNF
SNF Cleanroom Paul G Allen L107
alveole Alveole Primo Training 2.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
p5000etch AMAT P5000 Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
amtetcher AMT Oxide Plasma Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
asml ASML PAS 5500/60 i-line Stepper Training 4.00 hours
SNF
SNF Cleanroom Paul G Allen L107
aw610_l AllWin 610 RTA Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
aw610_r AllWin 610 RTA Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
biologic Bio-Logic Potentiostat Training SNF Exfab Paul G Allen 155 Mavericks
bluem Blue M Oven Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
Bruker Dimension ICON AFM Training
cpd Critical Point Dryer Training 2.00 hours
SNF
SNF Cleanroom Paul G Allen L107
cytoviva Cytoviva Training 0.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
afm2 Digital Instruments AFM Nanoscope Dimension 3000 Training 3.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
disco-backgrind DISCO Backgrinder Training 3.00 hours
SNF
SNF Exfab Paul G Allen 159 Capitola
DISCO wafersaw DISCO wafersaw training 2.00 hours
SNF
SNF Exfab Paul G Allen 159 Capitola
SMF Training SMF Shriram 099
drytek2 Drytek 100 Plasma Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
wbebres Ebeam Process Wet Bench Training
SNF
SNF Cleanroom Paul G Allen L107
epi2 AMAT Centurion Epitaxial Training 4.00 hours
SNF
SNF Cleanroom Paul G Allen L107
lasercutter Lasercutter Training 1.00 hours
SNF
SNF Exfab Paul G Allen 155A Venice
evalign EV Group Contact Aligner Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
evbond EV Group Wafer Bonder Training 4.00 hours
SNF
SNF Cleanroom Paul G Allen L107
evgspraycoat EVG 101 Spray Coater Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
wbexfab_dev WbExfab_Dev Training 1.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
wbexfab_solv WbExfab_Solv Training 1.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
Titan TEM Training
fiji1 Fiji 1 and 2 Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
fiji2 Fiji 1 and 2 Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
fiji3 Fiji 3 Training 0.00 hours
SNF
SNF Cleanroom Paul G Allen L107
flipchipbonder Flip Chip Bonder Training 1.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
cvd-nanotube cvd-nanotube training 3.00 hours
SNF
SNF Exfab Paul G Allen L119 Año Nuevo
centrifuge Centrifuge Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
stresstest Flexus 2320 Stress Tester Training 0.75 hours
SNF
SNF Cleanroom Paul G Allen L107
form2-3d-printer Form2 3D Printer Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
nanoinkjet Dimatix Ink Jet Printer Training 7.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
fumehood1 Fumehood 1 Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
fumehood2 Fumehood 2 Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
fumehood3 Fumehood 3 Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
fumehood4 Fumehood 4 Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
gasonics Gasonics Aura Asher Training
SNF
SNF Cleanroom Paul G Allen L107
glovebox-l Glovebox-l Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
glovebox-r Glovebox-r Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
cmp CMP Training 1.50 hours
SNF
SNF Exfab Paul G Allen 159 Capitola
headway3 Headway 3 Training
SNF
SNF Exfab Paul G Allen 104 Stinson
headway2 Headway Manual Resist Spinner Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
heidelberg Heidelberg Training 2.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
heidelberg2 Heidelberg Training 2.00 hours
SNF
SNF Cleanroom Paul G Allen L107
yes YES Prime Oven Training
SNF
SNF Cleanroom Paul G Allen L107
yes2 Exfab YES2 HMDS oven training 0.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
hummer Hummer V Sputter Coater Training 1.00 hours
SNF
SNF Exfab Paul G Allen L119 Año Nuevo
disperser IKA Disperser Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
Innotec Innotec Evaporator Training 6.00 hours
SNF
SNF Cleanroom Paul G Allen L107
Intlvac_evap Intlvac Evaporation Training 2.00 hours
SNF
SNF Cleanroom Paul G Allen L107
Ion Mill_fcr (at SNSF) Intlvac Ion Mill Etcher Training
jasco-uv-vis-nir Jasco UV-Vis-NIR Training
SNF
SNF Exfab Paul G Allen 151 Ocean
karlsuss Karl Suss MA-6 Contact Aligner 1 and 2 Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
karlsuss2 Karl Suss MA-6 Contact Aligner 1 and 2 Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
ksbonder Karl Suss Wafer Bonder Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
keyence Keyence Training 0.50 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
KJL KJL Training SNSF Nanofabrication Spilker 006 Nanopatterning Cleanroom
LakeshoreHall Lakeshore Hall Measurement System training 3.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
lampoly Lam Research TCP 9400 Poly Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
laurell-R Laurell Manual Resist Spinner Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
eddycurrent LEI1500 Contactless Sheet Resistance Mapping Training 1.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
lesker-sputter Lesker Sputter Training 1.00 hours SNF Exfab Paul G Allen 155A Venice
lesker2-sputter Lesker2 Sputter Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
lithosolv Lithography Solvent Bench Training
SNF
SNF Cleanroom Paul G Allen L107
malvern-dls Malvern Dynamic Light Scattering (DLS) Zetasizer Training SNF Exfab Paul G Allen 155 Mavericks
masksrub Mask Scrubber Training
SNF
SNF Cleanroom Paul G Allen L107
matrix Matrix Plasma Resist Strip Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
metalica Metalica Sputter Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
MFS Large MFS Large Training
MFS Small MFS Small Training
micromist-coater Micromist Coater Training 2.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
micromanipulator6000 micromanipulator6000 IV-CV probe station Training 0.50 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
micromill Micromill Training 1.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
mrc MRC Reactive Ion Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
mvd MVD Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
nanoscribe Nanoscribe Photonics GT Training 2.00 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
nanospec2 Nanospec Training 0.25 hours
SNF
SNF Exfab Paul G Allen 104 Stinson
nanospec3 Nanospec 3 Training
SNF
SNF Cleanroom Paul G Allen L107
Oerlikon Leybold Univex 400 RF/DC Sputter Station Training
optomec-printer Optomec Printer Training 14.00 hours
SNF
SNF Exfab Paul G Allen 155A Venice
oriel-duv Oriel DUV Training
SNF
SNF Exfab Paul G Allen 155A Venice
oxford-rie Oxford Dielectric Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
Ox-35 Oxford III-V etcher Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
RIE: Oxford PlasmaPro 80 (at SNSF) Oxford PlasmaPro 80 - Reactive Ion etcher Training 1.00 hours
XE-70_snl Park XE-70 Training
hotplate-1 PDMS Hotplate Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
spincoat-g3p8 PDMS Spin Coater Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
PDMS Workbench Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
parcoater Parylene Coater Training 3.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
PT-DSE Plasma Therm Versaline LL ICP Deep Silicon Etcher Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
PT-Ox Plasma Therm Versaline LL ICP Dielectric Etcher Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
PT-MTL Plasma Therm Versaline LL ICP Metal Etcher Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
plasma-etch Plasmaetch PE-50 Training 0.50 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
ccp-dep PlasmaTherm Shuttlelock PECVD System Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
hdpcvd PlasmaTherm Versaline HDP CVD System Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
prometrix Prometrix Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
sonicator Probe Sonicator Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
filmetrics Reflectance Spectrometer Filmetrics F40 Training
SNF
SNF Cleanroom Paul G Allen L107
samco Samco Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
savannah Savannah Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
s-neox Sensofar S-neox Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
sinton-lifetime-tester Sinton Lifetime Tester Training 1.00 hours
SNF
SNF Exfab Paul G Allen 151 Ocean
3d-wax-printer Solidscape 3D Wax Printer Training
SNF
SNF Exfab Paul G Allen 151 Ocean
SPF Measurement Bench Training
SNF
SNF SPF Paul G Allen 138 SPF
uetch SPTS uetch vapor etch Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
stsetch STS Deep RIE Etcher Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
sts STS Plasma Enhanced CVD Training 1.50 hours
SNF
SNF Cleanroom Paul G Allen L107
svgdev SVG Resist Develop tracks 1 and 2 Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
svgdev2 SVG Resist Develop tracks 1 and 2 Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
svgcoat SVG Resist Coat Tracks 1 and 2 Training 1.25 hours
SNF
SNF Cleanroom Paul G Allen L107
svgcoat2 SVG Resist Coat Tracks 1 and 2 Training 1.25 hours
SNF
SNF Cleanroom Paul G Allen L107
technics Technics Asher Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
p2 Tencor P2 Profilometer Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
teos2 Teos Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermco1 Thermco Oxidation Furnaces Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermco 3 Thermco Oxidation Furnaces Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermco4 Thermco Oxidation Furnaces Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermcoLTO Thermco LTO Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermconitride1 Thermco Nitride Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermcopoly1 Thermco Poly Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermcopoly2 Thermco Poly Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
thermolyne Thermolyne Muffle Furnace Training
SNF
SNF Exfab Paul G Allen 159 Capitola
thermoscientific-oven Thermoscientific Oven Training 0.00 hours
SNF
SNF Exfab Paul G Allen 155 Mavericks
thinky-mixer Thinky Mixer Training
SNF
SNF Exfab Paul G Allen 155 Mavericks
tylan9 Forming Gas Anneal Furnace Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
tylanbpsg TylanBPSG Deposition Furnace Training 3.00 hours
SNF
SNF Cleanroom Paul G Allen L107
tylanfga Forming Gas Anneal Furnace Training 1.00 hours
SNF
SNF Cleanroom Paul G Allen L107
uvcure Ultraviolet Photoresist Cure Training
SNF
SNF Cleanroom Paul G Allen L107
voltera Voltera Training
SNF
SNF Exfab Paul G Allen 151 Ocean
wbclean-1 Wet Bench Clean 1 and 2 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbclean-2 Wet Bench Clean 1 and 2 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbclean_res-hotphos Wet Bench Clean Piranha/HF/Phosphoric Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbclean_res-hf Wet Bench Clean Piranha/HF/Phosphoric Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbclean_res-piranha Wet Bench Clean Piranha/HF/Phosphoric Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbclean3 Wet Bench CMOS Metal (wbclean3) Training
SNF
SNF Cleanroom Paul G Allen L107
wbdecon Wet Bench Decontamination Training
SNF
SNF Cleanroom Paul G Allen L107
wbflexcorr-1 Wet Bench Flexcorr 1and2 and 3and4 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexcorr-2 Wet Bench Flexcorr 1and2 and 3and4 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexcorr-3 Wet Bench Flexcorr 1and2 and 3and4 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexcorr-4 Wet Bench Flexcorr 1and2 and 3and4 Training 2.25 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexsolv Wet Bench Flexible Solvents 1 and 2 Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexsolv-1 Wet Bench Flexible Solvents 1 and 2 Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
wbflexsolv-2 Wet Bench Flexible Solvents 1 and 2 Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
wbgen2 Wet Bench Germanium Training
SNF
SNF Cleanroom Paul G Allen L107
wbmiscres Wet Bench Miscellaneous Photoresist Training
SNF
SNF Cleanroom Paul G Allen L107
white-oven White Oven Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
woollam Woollam Training 2.00 hours
SNF
SNF Cleanroom Paul G Allen L107
xactix Xactix Xenon Difluoride Etcher Training 0.50 hours
SNF
SNF Cleanroom Paul G Allen L107
N/A Micro Compounder training 0.00 hours
SNF
SNF Exfab Paul G Allen 159 Capitola
PHI_XPS_snl XPS PHI VersaProbe Training SNSF McCullough 102
XPS PHI VersaProbe Training SNSF McCullough 102
Last modified: 25 Aug 2020