4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	All	SNF Exfab Paul G Allen 104 Stinson
Heidelberg MLA 150 heidelberg	Heidelberg Training	All	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Headway 3 Manual Resist Spinner headway3	Resist Coat (manual) Headway 3 Training	All	SNF Exfab Paul G Allen 104 Stinson
Finetech Lambda flipchipbonder	Flip Chip Bonder Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Nanospec 210XP nanospec2	Nanospec Training	All	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	All	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Fiji 1 ALD fiji1	ALD Fiji 1 and 2 Training	Semiclean	SNF Cleanroom Paul G Allen L107
Wet Bench Decontamination wbdecon	Wet Bench Decontamination Training	Clean	SNF Cleanroom Paul G Allen L107	KOH or wafersaw or post-cmp decontamination
SVG Develop Track 1 svgdev	SVG Resist Develop tracks 1 and 2 Training	All	SNF Cleanroom Paul G Allen L107	Automatic development.
Tylan9 Forming Gas Anneal Furnace tylan9	Forming Gas Anneal Furnace Training	Flexible	SNF Cleanroom Paul G Allen L107	Any material that won't vaporize is okay. N2 and Ar annealing available.
Nanospec 3 nanospec3	Nanospec 3 Training	All	SNF Cleanroom Paul G Allen L107
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Oxford III-V etcher Ox-35	Oxford III-V etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Metal etching or Metal hard masks are not allowed. 4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers; Restrictions: III-V materials only.
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	All	SNF Cleanroom Paul G Allen L107	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
RTA AllWin 610 aw610_r	AllWin 610 RTA Training	Flexible	SNF Cleanroom Paul G Allen L107

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Material Thickness Range	Materials Lab Supplied	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
Aixtron Black Magic graphene CVD furnace aixtron-graphene	Deposition > Chemical Vapor Deposition (CVD) > Graphene CVD Growth		Flexible		C						800 °C - 1100 °C		78% N₂, 21% O₂, ~1% Ar CH₄ H₂	Pieces 2" 3" 4"	(Si) , (Various)	1x4" wafer or Copper/Nickel foil
Aixtron MOCVD - III-N system aix-ccs	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD		Clean (MOCVD)	0.00 - 5.00 μm	AlGaN AlN GaN III-N materials InAlN InGaAlN InGaN InN						400 °C - 1300 °C		H₂ MO sources N₂ NH₃ SiH₄	Pieces 2" 4"	(Si) , (Al₂O₃) , (SiC) , (GaN)	4"x1, 2"X3, pieces
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible	0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN						300 °C - 800 °C		H₂ MO sources N₂ SiH₄	Pieces 2" 3" 4"	(Si) , (SiO2) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible	0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
AJA2 Evaporator aja2-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Semiclean	0.00 - 300.00 nm	Ag Al Co Cr Ge Hf Nb Pd Pt Si Ta Ti V W Zr Moly									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x3 or 6"x1 wafers or pieces
AMAT Centurion Epitaxial System epi2	Doping Deposition > Chemical Vapor Deposition (CVD) > EPI (CVD) Annealing & Oxidation > Hydrogen (H2) Annealing Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD Deposition > Chemical Vapor Deposition (CVD) > Plasma Enhanced (PE) CVD	Pre-Diffusion Clean	Clean	50.00 Å - 3.00 μm	Ge Si SiGe						600 °C - 1200 °C		AsH₃ B₃H₆ GeH₄ H₂ N₂ PH₃ SiH₄	4"		1
ASML PAS 5500/60 i-line Stepper asml	Photolithography > Exposure > Stepper		All			365 nm	5 inch							4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Drying > CO2 Drying		Flexible									CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible											Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1x4", 1x6" or 1x8" wafer, or pieces
EVG 101 Spray Coater evgspraycoat	Photolithography > Resist coat > Resist Spray Coat (manual)		All						Resists					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	1
EVG Contact Aligner evalign	Photolithography > Exposure > Contact Aligner		All			350 - 450 nm	5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	one piece or wafer
EVG Wafer Bonder evbond	Bonding		Flexible											Pieces 2" 3" 4"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (LiNb)
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual)		Flexible							AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning		Flexible									Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 1 ALD fiji1	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Semiclean	1.00 Å - 50.00 nm	Metal oxides HfN Pt Ru SiO₂ Ta₂O₅ TaN TiN Various Dielectrics Alumina Hafnia Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2)
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Finetech Lambda flipchipbonder	Bonding		Flexible								°C - 400 °C			Pieces 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge)	1
First Nano carbon nanotube CVD furnace cvd-nanotube	Deposition > Chemical Vapor Deposition (CVD) > Carbon Nanotube CVD Growth		Flexible		CNT						800 °C - 1100 °C		Ar C₂H₅OH CH₄ H₂ O₂	Pieces 2" 3" 4"	(Si) , (SiO2)	1x4" wafer or multiple pieces
Flexus 2320 Stress Tester stresstest	Characterization > Film Stress Measurement		All											3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1