3 inch wafer

Short Name:

The following is a list of equipment where 3 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	Convection in N2. Cure. Programmable.
Prometrix Resistivity Mapping System prometrix	Prometrix Training	All	SNF Cleanroom Paul G Allen L107	3 Probe Heads for different cleanliness groups.
AJA2 Evaporator aja2-evap	Evaporator AJA2	Semiclean	SNF Cleanroom Paul G Allen L107	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
MVD mvd	MVD Training	Flexible	SNF Cleanroom Paul G Allen L107	Reactor located inside glovebox
Wet Bench Flexible Solvents 2 wbflexsolv-2	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, hot plate
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Flexus 2320 Stress Tester stresstest	Stress Tester Flexus 2320 Training	All	SNF Cleanroom Paul G Allen L107
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Decontamination wbdecon	Wet Bench Decontamination Training	Clean	SNF Cleanroom Paul G Allen L107	KOH or wafersaw or post-cmp decontamination
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers after resist coating.
Woollam woollam	Woollam Training	All	SNF Cleanroom Paul G Allen L107
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align.
Intlvac Evaporator Intlvac_evap	Evaporator Intlvac Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107
Wet Bench Clean_res-piranha wbclean_res-piranha	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist will be removed
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align, including IR.
Wet Bench Clean 2 wbclean-2	Wet Bench Clean1and2 Training	Clean	SNF Cleanroom Paul G Allen L107	No resist allowed. Resist should have been removed at the wbclean_res-piranha
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	All	SNF Cleanroom Paul G Allen L107	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
Wet Bench Flexcorr 3 wbflexcorr-3	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot Plate available. GaAs not allowed.
EVG Contact Aligner evalign	Contact Aligner EVG Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Anodic Bond, backside align, including IR.

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Deposition		Flexible				poly(p-xylylene)					Pieces 2" 3" 4" 6" 8" Cones Disks Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)
Plasmaetch PE-50 plasma-etch	Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist						78% N₂, 21% O₂, ~1% Ar		Pieces 2" 3" 4" 6"		Multiple
Profilometer Alphastep 500 alphastep	Characterization > Surface Analysis > Profilometer > Step Profile		Flexible									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Profilometer AlphaStep D-300 alphastep2	Characterization > Surface Analysis > Profilometer > Step Profile		Flexible									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
Prometrix Resistivity Mapping System prometrix	Characterization > Sheet Resistance Measurement		All									2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
RTA AllWin 610 aw610_l	Annealing & Oxidation > Rapid Thermal Annealing	Pre-Diffusion Clean	Clean					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	1 wafer
RTA AllWin 610 aw610_r	Annealing & Oxidation > Rapid Thermal Annealing		Flexible					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI			20 ºC		CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia	24 °C - 250 °C		N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy		All			0.00 mm - 35.00 mm					6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible									Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂						C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Thermco3 Oxidation Furnace thermco 3	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂	700 °C - 1100 °C		H₂ N₂ O₂		Pieces 2" 3" 4" 6"		50
Tylan9 Forming Gas Anneal Furnace tylan9	Annealing & Oxidation > Annealing (furnace)		Flexible				SiO₂	250 °C - 1100 °C		10% H₂ in N₂ Ar H₂ N₂ O₂		Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2)	50
Tylanfga Forming Gas Anneal Furnace tylanfga	Annealing & Oxidation > Annealing (furnace)	Standard Metal Clean	Semiclean			100.00 Å - 100.00 Å		250 °C - 800 °C		10% H₂ in N₂ Ar N₂		Pieces 2" 3" 4"		50
Wet Bench Clean 1 wbclean-1	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean 2 wbclean-2	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF 6:1 BOE SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean_res- hotphos wbclean_res-hotphos	Etching > Wet Etching > Silicon Nitride Wet Etching		Clean	Si3N4					H₃PO₄			3" 4" 6"	(Si) , (SiGe) , (SiO2)