4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
MVD mvd	MVD Training	Flexible	SNF Cleanroom Paul G Allen L107	Reactor located inside glovebox
Wet Bench Resist Strip wbresstrip-1	Wet Bench Resist Strip	Clean (Ge), Semiclean, Flexible	SNF Cleanroom Paul G Allen L107	Wet Resist Removal: SRS-100 or PRS1000
Xactix Xenon Difluoride Etcher xactix	Xactix Xenon Difluoride Etcher Training	All	SNF Cleanroom Paul G Allen L107	Isotropic Si etching; can be used for backside Si removal on small pieces
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align, including IR.
AJA2 Evaporator aja2-evap	Evaporator AJA2	Semiclean	SNF Cleanroom Paul G Allen L107	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist as mask allowed
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
ASML PAS 5500/60 i-line Stepper asml	Stepper ASML PAS 5500/60 i-line Training	All	SNF Cleanroom Paul G Allen L107	5:1 reducing stepper
Intlvac Evaporator Intlvac_evap	Evaporator Intlvac Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107
Woollam woollam	Woollam Training	All	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.
Oxford Dielectric Etcher oxford-rie	Oxford Dielectric Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers
EVG Contact Aligner evalign	Contact Aligner EVG Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Anodic Bond, backside align, including IR.
SVG Resist Coat Track 2 svgcoat2	SVG Resist Coat Tracks 1 and 2 Training	All	SNF Cleanroom Paul G Allen L107	Automatic HMDS, Resist spinning, and Bake. AZ5214IR Image Reversal.
Wet Bench Flexible Solvents 1 wbflexsolv-1	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, two ultrasonic baths.
Lam Research TCP 9400 Poly Etcher lampoly	Lam Research TCP 9400 Poly Etcher Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107	Single wafer etch with auto-loading from a cassette. Equipment originally used for gate etching with high selectivity to thin gate oxides.
Thermco3 Oxidation Furnace thermco 3	Thermco 3 Oxidation Furnaces Training	Clean	SNF Cleanroom Paul G Allen L107	Dry and wet oxidation. Use calculator to determine growth rate. N2 annealing available.
Wet Bench Clean 2 wbclean-2	Wet Bench Clean1and2 Training	Clean	SNF Cleanroom Paul G Allen L107	No resist allowed. Resist should have been removed at the wbclean_res-piranha
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide Anneal	Tystar Atmospheric Tube Training	Flexible	SNF Cleanroom Paul G Allen L107

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Resist	Developer	Process Temperature Range	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI					20 ºC	CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia			24 °C - 250 °C	N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy		All			0.00 mm - 35.00 mm						6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible										Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂							C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
SVG Develop Track 1 svgdev	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Develop Track 2 svgdev2	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 1 svgcoat	Photolithography > Resist coat > Resist Coat (automatic)		All					Shipley 3612 resist SPR220-3 resist SPR220-7					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 2 svgcoat2	Photolithography > Resist coat > Resist Coat (automatic)		All					AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
Technics Asher technics	Etching > Dry Etching Cleaning > Resist Removal > Dry Resist Removal		Flexible	Resist	dimethylpolysiloxane poly(p-xylylene) PI						O₂		Pieces 4" 6" 8"	(Si) , (SiO2) , (SiO₂)	Four 4" wafers to pieces, one 6" or 8" wafer
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Thermco3 Oxidation Furnace thermco 3	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂			700 °C - 1100 °C	H₂ N₂ O₂		Pieces 2" 3" 4" 6"		50
Tylan9 Forming Gas Anneal Furnace tylan9	Annealing & Oxidation > Annealing (furnace)		Flexible				SiO₂			250 °C - 1100 °C	10% H₂ in N₂ Ar H₂ N₂ O₂		Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2)	50
Tylanfga Forming Gas Anneal Furnace tylanfga	Annealing & Oxidation > Annealing (furnace)	Standard Metal Clean	Semiclean			100.00 Å - 100.00 Å				250 °C - 800 °C	10% H₂ in N₂ Ar N₂		Pieces 2" 3" 4"		50
Tystar Bank 1 Tube 1 B1T1 Flexible Oxide	Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide Anneal	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 5 B2T5 Clean Oxide Anneal	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100