2 inch wafer

Short Name:

The following is a list of equipment where 2 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Heidelberg MLA 150 - 2 heidelberg2	Heidelberg Training	All	SNF Cleanroom Paul G Allen L107	Direct Write
Fiji 1 ALD fiji1	ALD Fiji 1 and 2 Training	Semiclean	SNF Cleanroom Paul G Allen L107
EVG 101 Spray Coater evgspraycoat	Spray Coater EVG 101 Training	All	SNF Cleanroom Paul G Allen L107	Spray coating of resists
Samco PC300 Plasma Etch System samco	Samco Training	Flexible	SNF Cleanroom Paul G Allen L107
SPTS uetch vapor etch uetch	SPTS uetch vapor etch Training	All	SNF Cleanroom Paul G Allen L107	Pieces need a carrier wafer; Isotropic Etching
Sensofar S-neox s-neox	Sensofar S-neox Training	All	SNF Cleanroom Paul G Allen L107	non contact 3D optical profiling
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Cleanroom Paul G Allen L107	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
Wet Bench Flexcorr 1 wbflexcorr-1	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot plate available. GaAs allowed in personal labware only.
HMDS Vapor Prime Oven, YES yes	YES Prime Oven Training	All	SNF Cleanroom Paul G Allen L107	Two programs: Singe and HMDS prime or Singe only. No Resist allowed!
Tencor P2 Profilometer p2	Tencor P2 Profilometer Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107	Step height measurement range 500 Å to 80 µm
AJA2 Evaporator aja2-evap	Evaporator AJA2	Semiclean	SNF Cleanroom Paul G Allen L107	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
Wet Bench Flexcorr 2 wbflexcorr-2	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot pots available. GaAs allowed in personal labware only
Oven (White) white-oven	White Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	For LOL2000 bake or bakes which are not allowed in the other ovens and need higher temperatures, up to 200C, programmable.
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	Convection in N2. Cure. Programmable.
Prometrix Resistivity Mapping System prometrix	Prometrix Training	All	SNF Cleanroom Paul G Allen L107	3 Probe Heads for different cleanliness groups.
Wet Bench Resist Strip wbresstrip-1	Wet Bench Resist Strip	Clean (Ge), Semiclean, Flexible	SNF Cleanroom Paul G Allen L107	Wet Resist Removal: SRS-100 or PRS1000
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers after resist coating.

Pages

Equipment name & NEMO ID	Technique	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Materials User Supplied	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Resolution Notes	Substrate Size	Substrate Type	Maximum Load
Heidelberg MLA 150 - 2 heidelberg2	Photolithography > Exposure > Direct Write	All						375 nm									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
HMDS Vapor Prime Oven, YES yes	Photolithography > Wafer preparation before resist > Singe Photolithography > Wafer preparation before resist > Wafer Prime (HMDS)	All										150 ºC	[(CH₃)₃Si]₂NH				Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Intlvac Evaporator Intlvac_evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Clean, Semiclean			0.00 - 0.50 μm	Al Co Cr Ge Hf Nb Ni Pd Si Ta Ti V W Zr Moly											Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	12 4 inch wafers, 2 6 inch wafers
Karl Suss MA-6 Contact Aligner karlsuss	Photolithography > Exposure > Contact Aligner	All						365 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Karl Suss MA-6 Contact Aligner karlsuss2	Photolithography > Exposure > Contact Aligner	All						365 nm or 405 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Keyence Digital Microscope VHX-6000 keyence	Characterization > Surface Analysis > Microscopy	All															Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Laurell Manual Resist Spinner laurell-R	Photolithography > Resist coat > Resist Coat (manual)	All									Resists SU-8 LOL		(C₅O₂H₈)_n				Pieces 2" 3" 4" 6"
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	Characterization > Sheet Resistance Measurement	All													8 in wafer	Sensor Transducer Size is 14 mm diameter	2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	1 wafer(2" to 8")
Lesker Sputter lesker-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Flexible				Ag Al AlSi Au Co Cr Cu Fe Nb Ni Pd Si SiO₂ Ta Ti TiN W Alumina ITO	CoFeB Ge Hf In₂O₃ LaB₆ Ru Sc Sn TiN WO₃ ZnO₃ ZrY GST Hafnia Moly Ti Tungsten										Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1 4 inch wafer, 1 6 inch wafer
Lesker2 Sputter lesker2-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Semiclean			1.00 μm	Ag Al AlSi Cr Ge Pd Ru Sc Si SiO₂ Sn Ta Ti TiN W Alumina ITO Moly						°C - 800 °C		Ar N₂ O₂			Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one 4 inch wafer, one 6 inch wafer
micromanipulator6000 IV-CV probe station micromanipulator6000	Characterization	All															Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb) , (Various)	1x4" wafer
MRC Reactive Ion Etcher mrc	Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)	Flexible	Metals Various Dielectrics	Metal oxides PI										Ar CHClF₂ CHF₃ O₂ SF₆			Pieces 2" 3" 4" 6"		1
MVD mvd	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD	Flexible			1.00 Å - 50.00 nm	C₉H₂₃NO₃Si Various Dielectrics Alumina DETA Hafnia ODS SAMS						24 °C - 150 °C		Ar			Pieces 2" 3" 4" 6" 8"
Nanospec 210XP nanospec2	Characterization > Reflectometry	All															Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Nanospec 3 nanospec3	Characterization > Reflectometry	All															Pieces 2" 3" 4" 6"
Optomec Printer optomec-printer	Deposition > Ink	Flexible															Pieces 2" 3" 4" 6"
Oven (White) white-oven	Photolithography > Resist Bake > Oven Bake	Flexible										0 °C - 200 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven 110°C post-bake oven110	Photolithography > Resist Bake > Oven Bake > Resist Post Bake	All										110 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
Oven 90°C prebake oven90	Photolithography > Resist Bake > Oven Bake > Resist Prebake	All										90 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven BlueM 200°C to 430°C bluem	Photolithography > Resist Bake > Oven Bake	Flexible										0 °C - 430 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)