6 inch wafer

Short Name:

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Woollam woollam	Woollam Training	All	SNF Cleanroom Paul G Allen L107
Wet Bench Clean_res-piranha wbclean_res-piranha	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist will be removed
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Wet Bench Clean 2 wbclean-2	Wet Bench Clean1and2 Training	Clean	SNF Cleanroom Paul G Allen L107	No resist allowed. Resist should have been removed at the wbclean_res-piranha
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 3 wbflexcorr-3	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot Plate available. GaAs not allowed.
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers after resist coating.
Nanospec 3 nanospec3	Nanospec 3 Training	All	SNF Cleanroom Paul G Allen L107
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	All	SNF Cleanroom Paul G Allen L107	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
Wet Bench Flexible Solvents wbflexsolv	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or resist removal.
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align.
Tystar Bank 1 Tube 1 B1T1 Flexible Oxide	Tystar Atmospheric Tube Training	Flexible	SNF Cleanroom Paul G Allen L107
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Critical Point Dryer Training	Flexible	SNF Cleanroom Paul G Allen L107	CO2 drying after release of micromachined devices
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align, including IR.
Wet Bench Clean 1 wbclean-1	Wet Bench Clean1and2 Training	Clean	SNF Cleanroom Paul G Allen L107	No resist allowed. Resist should have been removed at the wbclean_res-piranha.
EVG Contact Aligner evalign	Contact Aligner EVG Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Anodic Bond, backside align, including IR.
Wet Bench Clean_res- hotphos wbclean_res-hotphos	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist should have been removed
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode
Thermco3 Oxidation Furnace thermco 3	Thermco 3 Oxidation Furnaces Training	Clean	SNF Cleanroom Paul G Allen L107	Dry and wet oxidation. Use calculator to determine growth rate. N2 annealing available.

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
Prometrix Resistivity Mapping System prometrix	Characterization > Sheet Resistance Measurement		All									2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
RTA AllWin 610 aw610_l	Annealing & Oxidation > Rapid Thermal Annealing	Pre-Diffusion Clean	Clean					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	1 wafer
RTA AllWin 610 aw610_r	Annealing & Oxidation > Rapid Thermal Annealing		Flexible					21 °C - 1150 °C		4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI			20 ºC		CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia	24 °C - 250 °C		N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy		All			0.00 mm - 35.00 mm					6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible									Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂						C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
Technics Asher technics	Etching > Dry Etching Cleaning > Resist Removal > Dry Resist Removal		Flexible	Resist	dimethylpolysiloxane poly(p-xylylene) PI					O₂		Pieces 4" 6" 8"	(Si) , (SiO2) , (SiO₂)	Four 4" wafers to pieces, one 6" or 8" wafer
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean									Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Thermco3 Oxidation Furnace thermco 3	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂	700 °C - 1100 °C		H₂ N₂ O₂		Pieces 2" 3" 4" 6"		50
Tystar Bank 1 Tube 1 B1T1 Flexible Oxide	Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm		400 °C - 1100 °C		4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide Anneal	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm		400 °C - 1100 °C		4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 5 B2T5 Clean Oxide Anneal	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm		400 °C - 1100 °C		4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm		400 °C - 1100 °C		4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm		400 °C - 1100 °C		4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Wet Bench Clean 1 wbclean-1	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean 2 wbclean-2	Cleaning > Pre-Diffusion Clean Cleaning > Pre-Diffusion Clean > Pre-LPCVD or Pre-Metal Clean		Clean						50:1 HF 6:1 BOE SC1 SC2			3" 4" 6"	(Si) , (SiGe) , (SiO2)	25
Wet Bench Clean_res- hotphos wbclean_res-hotphos	Etching > Wet Etching > Silicon Nitride Wet Etching		Clean	Si3N4					H₃PO₄			3" 4" 6"	(Si) , (SiGe) , (SiO2)