Pieces

Short Name:

Pieces

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Headway 3 Manual Resist Spinner headway3	Resist Coat (manual) Headway 3 Training	All	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	All	SNF Exfab Paul G Allen 104 Stinson
Heidelberg MLA 150 heidelberg	Heidelberg Training	All	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Finetech Lambda flipchipbonder	Flip Chip Bonder Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Nanospec 210XP nanospec2	Nanospec Training	All	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	All	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 3 wbflexcorr-3	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot Plate available. GaAs not allowed.
Thermco3 Oxidation Furnace thermco 3	Thermco 3 Oxidation Furnaces Training	Clean	SNF Cleanroom Paul G Allen L107	Dry and wet oxidation. Use calculator to determine growth rate. N2 annealing available.
Woollam woollam	Woollam Training	All	SNF Cleanroom Paul G Allen L107
Wet Bench Flexible Solvents wbflexsolv	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or resist removal.
Tylanfga Forming Gas Anneal Furnace tylanfga	Forming Gas Anneal Furnace Training	Semiclean	SNF Cleanroom Paul G Allen L107	For standard metals deposited in Lesker2, Intlvac Sputter or Intlvac Evaporation only. N2 and Ar annealing available. Please contact staff for more information.
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Critical Point Dryer Training	Flexible	SNF Cleanroom Paul G Allen L107	CO2 drying after release of micromachined devices
Tylan9 Forming Gas Anneal Furnace tylan9	Forming Gas Anneal Furnace Training	Flexible	SNF Cleanroom Paul G Allen L107	Any material that won't vaporize is okay. N2 and Ar annealing available.
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	All	SNF Cleanroom Paul G Allen L107	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Material Thickness Range	Materials Lab Supplied	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
Aixtron Black Magic graphene CVD furnace aixtron-graphene	Deposition > Chemical Vapor Deposition (CVD) > Graphene CVD Growth		Flexible		C						800 °C - 1100 °C		78% N₂, 21% O₂, ~1% Ar CH₄ H₂	Pieces 2" 3" 4"	(Si) , (Various)	1x4" wafer or Copper/Nickel foil
Aixtron MOCVD - III-N system aix-ccs	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD		Clean (MOCVD)	0.00 - 5.00 μm	AlGaN AlN GaN III-N materials InAlN InGaAlN InGaN InN						400 °C - 1300 °C		H₂ MO sources N₂ NH₃ SiH₄	Pieces 2" 4"	(Si) , (Al₂O₃) , (SiC) , (GaN)	4"x1, 2"X3, pieces
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible	0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN						300 °C - 800 °C		H₂ MO sources N₂ SiH₄	Pieces 2" 3" 4"	(Si) , (SiO2) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible	0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
AJA2 Evaporator aja2-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Semiclean	0.00 - 300.00 nm	Ag Al Co Cr Ge Hf Nb Pd Pt Si Ta Ti V W Zr Moly									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x3 or 6"x1 wafers or pieces
Asylum AFM afm-asylum	Characterization > Surface Analysis > Profilometer > Atomic Force Microscopy (AFM)		Flexible											Pieces 2" 3"
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Drying > CO2 Drying		Flexible									CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible											Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1x4", 1x6" or 1x8" wafer, or pieces
EVG 101 Spray Coater evgspraycoat	Photolithography > Resist coat > Resist Spray Coat (manual)		All						Resists					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	1
EVG Contact Aligner evalign	Photolithography > Exposure > Contact Aligner		All			350 - 450 nm	5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	one piece or wafer
EVG Wafer Bonder evbond	Bonding		Flexible											Pieces 2" 3" 4"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (LiNb)
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual)		Flexible							AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning		Flexible									Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 1 ALD fiji1	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Semiclean	1.00 Å - 50.00 nm	Metal oxides HfN Pt Ru SiO₂ Ta₂O₅ TaN TiN Various Dielectrics Alumina Hafnia Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2)
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Finetech Lambda flipchipbonder	Bonding		Flexible								°C - 400 °C			Pieces 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge)	1
First Nano carbon nanotube CVD furnace cvd-nanotube	Deposition > Chemical Vapor Deposition (CVD) > Carbon Nanotube CVD Growth		Flexible		CNT						800 °C - 1100 °C		Ar C₂H₅OH CH₄ H₂ O₂	Pieces 2" 3" 4"	(Si) , (SiO2)	1x4" wafer or multiple pieces
Headway 3 Manual Resist Spinner headway3	Photolithography > Resist coat > Resist Coat (manual)		All						Resists Shipley 3612 resist SPR220-3 resist SPR220-7					Pieces 2" 3" 4"		1 piece or wafer
Headway Manual Resist Spinner headway2	Photolithography > Resist coat > Resist Coat (manual)		All						AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist SPR220-3 resist SPR220-7 (C₅O₂H₈)_n					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one piece or wafer