4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Wet Bench Clean 2 wbclean-2	Wet Bench Clean1and2 Training	Clean	SNF Cleanroom Paul G Allen L107	No resist allowed. Resist should have been removed at the wbclean_res-piranha
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide Anneal	Tystar Atmospheric Tube Training	Flexible	SNF Cleanroom Paul G Allen L107
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	All	SNF Cleanroom Paul G Allen L107	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
Wet Bench Flexible Solvents 2 wbflexsolv-2	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, hot plate
Plasma Therm Versaline LL ICP Dielectric Etcher PT-Ox	Plasma Therm Versaline LL ICP Dielectric Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; Restrictions: Can not etch metals or metal oxides with no volatile by-products (shorting & arcing issues)
Tylanfga Forming Gas Anneal Furnace tylanfga	Forming Gas Anneal Furnace Training	Semiclean	SNF Cleanroom Paul G Allen L107	For standard metals deposited in Lesker2, Intlvac Sputter or Intlvac Evaporation only. N2 and Ar annealing available. Please contact staff for more information.
SVG Develop Track 2 svgdev2	SVG Resist Develop tracks 1 and 2 Training	All	SNF Cleanroom Paul G Allen L107	Automatic development.
Tystar Bank 2 Tube 5 B2T5 Clean Oxide Anneal	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Fiji 1 ALD fiji1	ALD Fiji 1 and 2 Training	Semiclean	SNF Cleanroom Paul G Allen L107
Wet Bench Decontamination wbdecon	Wet Bench Decontamination Training	Clean	SNF Cleanroom Paul G Allen L107	KOH or wafersaw or post-cmp decontamination
SVG Develop Track 1 svgdev	SVG Resist Develop tracks 1 and 2 Training	All	SNF Cleanroom Paul G Allen L107	Automatic development.
Tylan9 Forming Gas Anneal Furnace tylan9	Forming Gas Anneal Furnace Training	Flexible	SNF Cleanroom Paul G Allen L107	Any material that won't vaporize is okay. N2 and Ar annealing available.
Nanospec 3 nanospec3	Nanospec 3 Training	All	SNF Cleanroom Paul G Allen L107
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Oxford III-V etcher Ox-35	Oxford III-V etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Metal etching or Metal hard masks are not allowed. 4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers; Restrictions: III-V materials only.
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	All	SNF Cleanroom Paul G Allen L107	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
RTA AllWin 610 aw610_r	AllWin 610 RTA Training	Flexible	SNF Cleanroom Paul G Allen L107
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Cleanroom Paul G Allen L107
Wet Bench Clean_res-piranha wbclean_res-piranha	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist will be removed

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Resist	Developer	Process Temperature Range	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI					20 ºC	CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia			24 °C - 250 °C	N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy		All			0.00 mm - 35.00 mm						6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible										Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂							C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
SVG Develop Track 1 svgdev	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Develop Track 2 svgdev2	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 1 svgcoat	Photolithography > Resist coat > Resist Coat (automatic)		All					Shipley 3612 resist SPR220-3 resist SPR220-7					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 2 svgcoat2	Photolithography > Resist coat > Resist Coat (automatic)		All					AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
Technics Asher technics	Etching > Dry Etching Cleaning > Resist Removal > Dry Resist Removal		Flexible	Resist	dimethylpolysiloxane poly(p-xylylene) PI						O₂		Pieces 4" 6" 8"	(Si) , (SiO2) , (SiO₂)	Four 4" wafers to pieces, one 6" or 8" wafer
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Thermco3 Oxidation Furnace thermco 3	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂			700 °C - 1100 °C	H₂ N₂ O₂		Pieces 2" 3" 4" 6"		50
Tylan9 Forming Gas Anneal Furnace tylan9	Annealing & Oxidation > Annealing (furnace)		Flexible				SiO₂			250 °C - 1100 °C	10% H₂ in N₂ Ar H₂ N₂ O₂		Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2)	50
Tylanfga Forming Gas Anneal Furnace tylanfga	Annealing & Oxidation > Annealing (furnace)	Standard Metal Clean	Semiclean			100.00 Å - 100.00 Å				250 °C - 800 °C	10% H₂ in N₂ Ar N₂		Pieces 2" 3" 4"		50
Tystar Bank 1 Tube 1 B1T1 Flexible Oxide	Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide Anneal	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 5 B2T5 Clean Oxide Anneal	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100