Flexible

The "Flexible" cleanliness group is part of the SNF/ExFab contamination policy.

The following is a list of equipment that fall into the "Flexible" category.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Nanoscribe Photonics GT nanoscribe	Nanoscribe Photonics GT Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Finetech Lambda flipchipbonder	Flip Chip Bonder Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
Oxford Dielectric Etcher oxford-rie	Oxford Dielectric Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers
Wet Bench Flexcorr 1 wbflexcorr-1	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot plate available. GaAs allowed in personal labware only.
Plasma Therm Versaline LL ICP Dielectric Etcher PT-Ox	Plasma Therm Versaline LL ICP Dielectric Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; Restrictions: Can not etch metals or metal oxides with no volatile by-products (shorting & arcing issues)
Wet Bench Flexcorr 2 wbflexcorr-2	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot pots available. GaAs allowed in personal labware only
Oven (White) white-oven	White Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	For LOL2000 bake or bakes which are not allowed in the other ovens and need higher temperatures, up to 200C, programmable.
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	Convection in N2. Cure. Programmable.
Wet Bench Resist Strip wbresstrip-1	Wet Bench Resist Strip	Clean (Ge), Semiclean, Flexible	SNF Cleanroom Paul G Allen L107	Wet Resist Removal: SRS-100 or PRS1000
Tylan9 Forming Gas Anneal Furnace tylan9	Forming Gas Anneal Furnace Training	Flexible	SNF Cleanroom Paul G Allen L107	Any material that won't vaporize is okay. N2 and Ar annealing available.
Fiji 2 ALD fiji2	ALD Fiji 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.
RTA AllWin 610 aw610_r	AllWin 610 RTA Training	Flexible	SNF Cleanroom Paul G Allen L107
Fiji 3 ALD fiji3	ALD Fiji 3 Training	Flexible	SNF Cleanroom Paul G Allen L107	Restricted to non-conductive films only

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Material Thickness Range	Materials Lab Supplied	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
Aixtron Black Magic graphene CVD furnace aixtron-graphene	Deposition > Chemical Vapor Deposition (CVD) > Graphene CVD Growth		Flexible		C		800 °C - 1100 °C		78% N₂, 21% O₂, ~1% Ar CH₄ H₂	Pieces 2" 3" 4"	(Si) , (Various)	1x4" wafer or Copper/Nickel foil
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible	0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN		300 °C - 800 °C		H₂ MO sources N₂ SiH₄	Pieces 2" 3" 4"	(Si) , (SiO2) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible	0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
Alveole Primo alveole	Patterning > Protein patterning		Flexible
Asylum AFM afm-asylum	Characterization > Surface Analysis > Profilometer > Atomic Force Microscopy (AFM)		Flexible							Pieces 2" 3"
Biologic SP-300 biologic	Characterization Other		Flexible
CMP GnP POLI-400L cmp	Machining > Wafer Polishing		Flexible
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Drying > CO2 Drying		Flexible					CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
CytoViva HSI cytoviva	Characterization		Flexible
DISCO Backgrinder disco-backgrind	Machining		Flexible
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible							Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1x4", 1x6" or 1x8" wafer, or pieces
Epilog Fusion M2 Laser Cutter lasercutter	Machining > Laser Cutting		Flexible
EVG Wafer Bonder evbond	Bonding		Flexible							Pieces 2" 3" 4"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (LiNb)
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual)		Flexible			AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning		Flexible					Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia		24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible	1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania		24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Finetech Lambda flipchipbonder	Bonding		Flexible				°C - 400 °C			Pieces 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge)	1
First Nano carbon nanotube CVD furnace cvd-nanotube	Deposition > Chemical Vapor Deposition (CVD) > Carbon Nanotube CVD Growth		Flexible		CNT		800 °C - 1100 °C		Ar C₂H₅OH CH₄ H₂ O₂	Pieces 2" 3" 4"	(Si) , (SiO2)	1x4" wafer or multiple pieces
Fisher Accuspin 24C centrifuge	Centrifugation		Flexible