Skip to content Skip to navigation

Wet Bench Miscellaneous (wbmiscres)

Overview

The wbmiscres wet bench is primarily used for manual spinning and developing of photoresist. No solvents may be used here. The bench is equipped with a rinse sink with a gooseneck, an automatic dump rinser, two N2 guns, DI hand sprayer, and hot plate. There are two spin/rinse dryers located to the left of the bench for 4 or 6 inch wafers. The headway manual spinner is mounted on the right side of the bench top.

Cleanliness: 

Capabilities and Specifications

Lithography Specifications

Process Temperature Range: 
Notes: 

Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!

Lab Facility, Location, and Badger Information

Training and Maintenance

Lab Facility: 
Primary Trainer: 
Backup Trainer(s): 
Primary Maintenance: 
Backup Maintenance: 

Steps to become a tool user

  1. Become a member of SNF.
  1. "All Litho" class is required before training on any of the lithography tools. Please send an email to all-litho-training@lists.stanford.edu to sign up for the All Litho class. Read more here: All Litho class.
  2. Sign up for the relevant training scheduled in .
  3. Read the relevant operating procedures:
  4. Shadowing: Contact a qualified user of the tool to arrange to ‘shadow’. It would be best to find someone who has used the system often. If you don’t know of anyone, you may check reservations or history to find a qualified user. You may also contact the . We recommend that you be with the lab member for the full time while operating the tool and ask lots of questions during the shadowing. You may have to shadow a qualified user more than one time to be comfortable with the tool.
    Print the SNF Training Shadowing Form on clean room paper.
  5. Contact the primary trainer: .

Operating Instructions