Skip to content Skip to navigation

Wet Bench Flexcorr 4 (wbflexcorr-4)

New Normal Changes

About PPE: alcohol wipe down before and after each use. In addition, face shields will be placed in the steamer for 1 1/2 hours. Aprons will be user owned, not shared.



Capabilities and Specifications

Process Temperature Range: 

Manual wet etching of non-standard materials. CTB. Labware for "clean" KOH or TMAH etching available. GaAs not allowed.

Lab Facility, Location, and Badger Information

Training and Maintenance

Lab Facility: 
Training Charges: 
2.25 hours
Primary Trainer: 
Backup Trainer(s): 
Primary Maintenance: 
Backup Maintenance: 

Steps to become a tool user

  1. Become a member of SNF.
  1. Read the relevant operating procedures:
  2. Shadowing: Contact a qualified user of the tool to arrange to ‘shadow’. It would be best to find someone who has used the system often. If you don’t know of anyone, you may check reservations or history to find a qualified user. You may also contact the Discussion Lists. We recommend that you be with the lab member for the full time while operating the tool and ask lots of questions during the shadowing. You may have to shadow a qualified user more than one time to be comfortable with the tool.
    Print the SNF Training Shadowing Form on clean room paper.
  3. Sign up for the relevant training scheduled in .
  4. Contact the primary trainer: .

Operating Instructions