Skip to content Skip to navigation

Controlled Environment

Some of the materials and chemicals that are used in our labs have strict safety requirements for use in well ventilated areas (fumehoods) or oxygen and moisture free environments (gloveboxes). 

Subscribe to
Equipment name & Badger ID Location Image Overview Link to Training
Fumehood 1
fumehood1
SNF Exfab Paul G Allen 155 Mavericks
Picture of Fumehood 1

Fumehood 1 is currently our only flexible fumehood space available in Room 155. The Formlabs 3D printer cleaner is currently located here. Please contact Michelle if you would like to use this space for your processing.

Fumehood 1 Training
Fumehood 2
fumehood2
SNF Exfab Paul G Allen 155 Mavericks
image of fumehood 2

Fumehood 2 currently houses a centrifuge and a dedicated desiccator that is not for general use.

Fumehood 2 Training
Fumehood 3
fumehood3
SNF Exfab Paul G Allen 155 Mavericks
image of Fumehood 3

Fumehood 3 is currently home to the IKA disperser and the sonicator used for making nano inks.

Fumehood 3 Training
Fumehood 4
fumehood4
SNF Exfab Paul G Allen 155 Mavericks
photo of Fumehood 4

Fumehood 4 is used primarily for PDMS processing including mixing, spin coating, and use of the hot plate.

Fumehood 4 Training
Glovebox-l
glovebox-l
SNF Exfab Paul G Allen 155 Mavericks
picture of glovebox-l

A custom-built, dual-chamber N2 glovebox for sample preparation and spin-coating at reduced oxygen and moisture content. The left-side contains spin-coater and hot-plates. Custom setups may be accommodated, with prior approval from staff.

Glovebox-l Training
Glovebox-r
glovebox-r
SNF Exfab Paul G Allen 155 Mavericks

A custom-built, dual-chamber N2 glovebox for sample preparation and spin-coating at reduced oxygen and moisture content. The right one presently has a transfer station and dual hot-plate/stirrer setup with stands for supporting glassware. Custom setups may be accommodated, with prior approval from staff.

Glovebox-r Training