Click on one of the links below to view a training video, which are also available on the nano at stanford youtube channel.
The first four videos below are required viewing before you can enter the SNF cleanroom (unless you are on an authorized tour).
SNF Stanford Non-standard Substrates, 7 minutes
Tweezers Cleaning (Teflon Coated Metal tweezers), 9 minutes
Tweezers (plastic tweezers) Cleaning, 9 minutes
Prof. Saraswat, Cleanliness Contamination and Chemical Handling, 51 minutes
Title | Description | |
---|---|---|
21 | Lampoly Video Recipe Setup |
Video describing Lampoly recipe set up: creation and editing. |
22 | Lampoly Video Etcher Setup |
Video showing how to set up an etch on the Lampoly. |
23 | Jasco UV-Vis-NIR Training Video |
Please watch this training video for the SNF ExFab Jasco-UV-Vis-NIR. |
24 | Heidelberg Training Videos |
Training video playlist for Heidelberg |
25 | Fiji1,2,and3 Loading and Unloading Videos |
And here is a video of the most common loading problem (when you go to insert the pins into the... |
26 | Fiji1,2,and3 Loading and Unloading Videos |
Here is a more realistic video of a Fiji load (note that the plate first hit the heater, then was... |
27 | Fiji1,2,and3 Loading and Unloading Videos |
This is a video taken of a successful load of the sample into the SNF Fiji. The chamber and load... |
28 | Fiji1,2,and3 Loading and Unloading Videos |
This animation shows the "theory" of how to load and unload the Fijis (1,2, and 3) at SNF. |
29 | Dry Etching at SNF (Part 4 of 4) - Choosing a Dry Etching Process & Tool |
Dr. James McVittie goes into further detail on Dry Etching: Choosing a Dry Etching Process & Tool (Part 4 of... |
30 | Dry Etching at SNF (Part 3 of 4) - Dry Etching Mechanisms | Dr. James McVittie goes into further detail on Dry Etching: Dry Etching Mechanisms (Part 3 of 4) from Stanford Nanofabrication... |
31 | Dry Etching at SNF (Part 2 of 4) - Basics of Plasmas & Types of Tools | Dr. James McVittie goes into further detail on Dry Etching: Basics of Plasmas & Types of Dry Etching Tools (Part... |
32 | Dry Etching at SNF (Part 1 of 4) - Introduction | Dr. James McVittie introduces Dry Etching (Part 1 of 4) from Stanford Nanofabrication Facility (SNF). This video is part of... |
33 | Bonding pieces of Si and LiNb with tweezers Video |
Our E241 students demonstrate their technique for bonding pieces of Si and LiNb with tweezers. |
34 | AlphaStep Profilometer Video Tutorial |
NOTE:This was made for the D-500 model AlphaStep, but I have yet to see anything that does not also apply... |