2 inch wafer

Short Name:

The following is a list of equipment where 2 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Heidelberg MLA 150 - 2 heidelberg2	Heidelberg Training	All	SNF Cleanroom Paul G Allen L107	Direct Write
HMDS Vapor Prime Oven, YES yes	YES Prime Oven Training	All	SNF Cleanroom Paul G Allen L107	Two programs: Singe and HMDS prime or Singe only. No Resist allowed!
Intlvac Evaporator Intlvac_evap	Evaporator Intlvac Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align.
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align, including IR.
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	All	SNF Exfab Paul G Allen 104 Stinson
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	All	SNF Cleanroom Paul G Allen L107	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	LEI1500 Contactless Sheet Resistance Mapping Training	All	SNF Exfab Paul G Allen 151 Ocean
Lesker Sputter lesker-sputter	Sputter Lesker 1&2 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Cleanroom Paul G Allen L107	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
micromanipulator6000 IV-CV probe station micromanipulator6000	micromanipulator6000 IV-CV probe station Training	All	SNF Exfab Paul G Allen 151 Ocean
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode
MVD mvd	MVD Training	Flexible	SNF Cleanroom Paul G Allen L107	Reactor located inside glovebox
Nanospec 210XP nanospec2	Nanospec Training	All	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Nanospec 3 nanospec3	Nanospec 3 Training	All	SNF Cleanroom Paul G Allen L107
Optomec Printer optomec-printer	Optomec Printer Training	Flexible	SNF Exfab Paul G Allen 155A Venice
Oven (White) white-oven	White Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	For LOL2000 bake or bakes which are not allowed in the other ovens and need higher temperatures, up to 200C, programmable.
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers after resist coating.
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Cleanroom Paul G Allen L107	Convection in N2. Cure. Programmable.

Pages

Equipment name & NEMO ID	Technique	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Materials User Supplied	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Resolution Notes	Substrate Size	Substrate Type	Maximum Load
Heidelberg MLA 150 - 2 heidelberg2	Photolithography > Exposure > Direct Write	All						375 nm									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
HMDS Vapor Prime Oven, YES yes	Photolithography > Wafer preparation before resist > Singe Photolithography > Wafer preparation before resist > Wafer Prime (HMDS)	All										150 ºC	[(CH₃)₃Si]₂NH				Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Intlvac Evaporator Intlvac_evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Clean, Semiclean			0.00 - 0.50 μm	Al Co Cr Ge Hf Nb Ni Pd Si Ta Ti V W Zr Moly											Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	12 4 inch wafers, 2 6 inch wafers
Karl Suss MA-6 Contact Aligner karlsuss2	Photolithography > Exposure > Contact Aligner	All						365 nm or 405 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Karl Suss MA-6 Contact Aligner karlsuss	Photolithography > Exposure > Contact Aligner	All						365 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Keyence Digital Microscope VHX-6000 keyence	Characterization > Surface Analysis > Microscopy	All															Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Laurell Manual Resist Spinner laurell-R	Photolithography > Resist coat > Resist Coat (manual)	All									Resists SU-8 LOL		(C₅O₂H₈)_n				Pieces 2" 3" 4" 6"
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	Characterization > Sheet Resistance Measurement	All													8 in wafer	Sensor Transducer Size is 14 mm diameter	2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	1 wafer(2" to 8")
Lesker Sputter lesker-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Flexible				Ag Al AlSi Au Co Cr Cu Fe Nb Ni Pd Si SiO₂ Ta Ti TiN W Alumina ITO	CoFeB Ge Hf In₂O₃ LaB₆ Ru Sc Sn TiN WO₃ ZnO₃ ZrY GST Hafnia Moly Ti Tungsten										Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1 4 inch wafer, 1 6 inch wafer
Lesker2 Sputter lesker2-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Semiclean			1.00 μm	Ag Al AlSi Cr Ge Pd Ru Sc Si SiO₂ Sn Ta Ti TiN W Alumina ITO Moly						°C - 800 °C		Ar N₂ O₂			Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one 4 inch wafer, one 6 inch wafer
micromanipulator6000 IV-CV probe station micromanipulator6000	Characterization	All															Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb) , (Various)	1x4" wafer
MRC Reactive Ion Etcher mrc	Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)	Flexible	Metals Various Dielectrics	Metal oxides PI										Ar CHClF₂ CHF₃ O₂ SF₆			Pieces 2" 3" 4" 6"		1
MVD mvd	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD	Flexible			1.00 Å - 50.00 nm	C₉H₂₃NO₃Si Various Dielectrics Alumina DETA Hafnia ODS SAMS						24 °C - 150 °C		Ar			Pieces 2" 3" 4" 6" 8"
Nanospec 210XP nanospec2	Characterization > Reflectometry	All															Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Nanospec 3 nanospec3	Characterization > Reflectometry	All															Pieces 2" 3" 4" 6"
Optomec Printer optomec-printer	Deposition > Ink	Flexible															Pieces 2" 3" 4" 6"
Oven (White) white-oven	Photolithography > Resist Bake > Oven Bake	Flexible										0 °C - 200 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven 110°C post-bake oven110	Photolithography > Resist Bake > Oven Bake > Resist Post Bake	All										110 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
Oven 90°C prebake oven90	Photolithography > Resist Bake > Oven Bake > Resist Prebake	All										90 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven BlueM 200°C to 430°C bluem	Photolithography > Resist Bake > Oven Bake	Flexible										0 °C - 430 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)