Skip to content Skip to navigation

Training Videos

Click on one of the links below to view a training video, which are also available on the nano at stanford youtube channel.

The first four videos below are required viewing before you can enter the SNF cleanroom (unless you are on an authorized tour).

SNF Wafer Handling, 7 minutes

SNF Stanford Non-standard Substrates, 7 minutes

 

Tweezers Cleaning (Teflon Coated Metal tweezers), 9 minutes

Tweezers (plastic tweezers) Cleaning, 9 minutes

 

Prof. Saraswat, Cleanliness Contamination and Chemical Handling, 51 minutes

Introduction to Fabrication & Processing

All Videos from Equipment & Documentation Pages

Title Description
21 PT-MTL Plasma Therm Training Video

Video describing operations for the SNF PT-MTL. The other Plasma Therm equipment is similar.

22 Samco Training Video

If the video does not display on the webpage, please us the following link:

https://www.youtube.com/watch?v=1g0yqbAP15w

23 SNF ExFab PE-50 Gas Adjustment
24 SNF ExFab PE-50 Plasma Power Controller

Brief video of how to adjust the plasma power on the PE-50 (this makes more sense when you also read...

25 SNF ExFab PE-50 Training Video
26 SNF Plasma Therm Recipe Setup

Video describing recipe set up for Plasma Therm Etch tools. PT-DSE has additional options, HDPCVD is similar to this video.

27 SVG Resist Coat Training Video
28 SVG Resist Develop Training Video
29 Voltera: Getting Started with Custom Inks
30 Wbclean Training Video
31 Wbexfab_dev Training Video Manual Development

The video is at https://youtu.be/zK9S_p5tteU

if the website does not automatically display the video.

32 Wet Bench Clean Piranha: Remove resist using piranha Training Video
33 Wet Benches Solvent Fire Suppression Video
34 YES Prime Oven Training Video

Pages

Last modified: 11 Aug 2023