Click on one of the links below to view a training video, which are also available on YouTube.
The first four videos below are required viewing before you can enter the SNF cleanroom (unless you are on an authorized tour).
|1||SNF ExFab PE-50 Training Video||https://youtu.be/RRS77Kk5i-g|
|2||SNF ExFab PE-50 Gas Adjustment||https://youtu.be/lf5o449I5uY|
|3||Nanoscribe Lens Cleaning||https://youtu.be/gtZeWUOMCHQ|
|4||Getting Started with Custom Inks on the Voltera||https://www.youtube.com/embed/nQ35itI6k8s|
|5||SNF ExFab PE-50 Plasma Power Controller||
Brief video of how to adjust the plasma power on the PE-50 (this makes more sense when you also read...
|6||SNF Fiji Loading and Unloading||
And here is a video of the most common loading problem (when you go to insert the pins into the...
|7||Stanford Nanofabrication Facility: Dry Etching (Part 4 of 4) - Choosing a Dry Etching Process & Tool||
Dr. James McVittie goes into further detail on Dry Etching: Choosing a Dry Etching Process & Tool (Part 4 of...
|8||SNF Fiji Loading and Unloading||
Here is a more realistic video of a Fiji load (note that the plate first hit the heater, then was...
If the video does not display on the webpage, please us the following link
|10||DIY Cleanroom Compatible Face Covering #1||
Make your own cleanroom-compatible face covering, using disposable, lint-free wipes! Everything you need to make your own can be found...
|11||SNF Tweezer Bonding Demo Video||
Our E241 students demonstrate their technique for bonding pieces of Si and LiNb with tweezers.
|12||Jasco UV-Vis-NIR Training Video||
Please watch this training video for the SNF ExFab Jasco-UV-Vis-NIR.
|13||Manual Development Video||
The video is at https://youtu.be/zK9S_p5tteU
if the website does not automatically display the video.
|14||Nanoscribe Video - Working with the Objectives||
The video is located at
if the automatic display on the website does not work...
|15||Nanoscribe video - Running the Nanoscribe||
The video is located at
if the automated video display on the website does not work
|16||SNF Fiji Loading and Unloading||
This animation shows the "theory" of how to load and unload the Fijis (1,2, and 3) at SNF.
|17||SNF Fiji Loading and Unloading||
This is a video taken of a successful load of the sample into the SNF Fiji. The chamber and load...
|18||Heidelberg Training Videos||
Training video playlist for Heidelberg
|19||SNF Lampoly Recipe Setup||
Video describing Lampoly recipe set up: creation and editing.
|20||SNF Plasma Therm Operations||
Video describing operations for the SNF PT-MTL. The other Plasma Therm equipment is similar.