Skip to content Skip to navigation

Gallium Arsenide

Chemical Formula:

GaAs

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	All	SNF Exfab Paul G Allen 104 Stinson
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	All	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Nanospec 210XP nanospec2	Nanospec Training	All	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
Heidelberg MLA 150 heidelberg	Heidelberg Training	All	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers with resist after the development, called post-bake.
Samco PC300 Plasma Etch System samco	Samco Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Flexcorr 1 wbflexcorr-1	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot plate available. GaAs allowed in personal labware only.
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	All	SNF Cleanroom Paul G Allen L107	Bakes wafers after resist coating.
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Cleanroom Paul G Allen L107	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
Wet Bench Flexcorr 2 wbflexcorr-2	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual wet etching of non-standard materials. Hot pots available. GaAs allowed in personal labware only
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align.
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Cleanroom Paul G Allen L107	1:1 Contact Aligner. Backside align, including IR.
Wet Bench Flexible Solvents 1 wbflexsolv-1	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, two ultrasonic baths.
Wet Bench Flexible Solvents 2 wbflexsolv-2	Wet Bench Flexible Solvents 1 and 2 Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning, hot plate
Sensofar S-neox s-neox	Sensofar S-neox Training	All	SNF Cleanroom Paul G Allen L107	non contact 3D optical profiling
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Tencor P2 Profilometer p2	Tencor P2 Profilometer Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107	Step height measurement range 500 Å to 80 µm

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Material Thickness Range	Materials Lab Supplied	Materials User Supplied	Minimum Resolution	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Resolution Notes	Substrate Size	Substrate Type	Maximum Load
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible	0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN							300 °C - 800 °C		H₂ MO sources N₂ SiH₄			Pieces 2" 3" 4"	(Si) , (SiO2) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible	0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania												Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Drying > CO2 Drying		Flexible										CO₂				Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible														Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1x4", 1x6" or 1x8" wafer, or pieces
Flexus 2320 Stress Tester stresstest	Characterization > Film Stress Measurement		All														3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Headway Manual Resist Spinner headway2	Photolithography > Resist coat > Resist Coat (manual)		All								AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist SPR220-3 resist SPR220-7 (C₅O₂H₈)_n						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one piece or wafer
Heidelberg MLA 150 heidelberg	Photolithography > Exposure > Direct Write		All					405 nm									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
Heidelberg MLA 150 - 2 heidelberg2	Photolithography > Exposure > Direct Write		All					375 nm									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
HMDS Vapor Prime Oven, YES yes	Photolithography > Wafer preparation before resist > Singe Photolithography > Wafer preparation before resist > Wafer Prime (HMDS)		All									150 ºC	[(CH₃)₃Si]₂NH				Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Karl Suss MA-6 Contact Aligner karlsuss	Photolithography > Exposure > Contact Aligner		All					365 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Karl Suss MA-6 Contact Aligner karlsuss2	Photolithography > Exposure > Contact Aligner		All					365 nm or 405 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Keyence Digital Microscope VHX-6000 keyence	Characterization > Surface Analysis > Microscopy		All														Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Lakeshore Hall Measurement System LakeshoreHall	Characterization > Hall measurement Characterization > Sheet Resistance Measurement		All	100.00 μm - 1000.00 μm								-258 °C - 1000 °C			8 in wafer	Sensor Transducer Size is 14 mm diameter	Pieces	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various)	1 piece
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	Characterization > Sheet Resistance Measurement		All												8 in wafer	Sensor Transducer Size is 14 mm diameter	2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	1 wafer(2" to 8")
Lesker Sputter lesker-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering		Flexible		Ag Al AlSi Au Co Cr Cu Fe Nb Ni Pd Si SiO₂ Ta Ti TiN W Alumina ITO	CoFeB Ge Hf In₂O₃ LaB₆ Ru Sc Sn TiN WO₃ ZnO₃ ZrY GST Hafnia Moly Ti Tungsten											Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1 4 inch wafer, 1 6 inch wafer
Lesker2 Sputter lesker2-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering		Semiclean	1.00 μm	Ag Al AlSi Cr Ge Pd Ru Sc Si SiO₂ Sn Ta Ti TiN W Alumina ITO Moly							°C - 800 °C		Ar N₂ O₂			Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one 4 inch wafer, one 6 inch wafer
micromanipulator6000 IV-CV probe station micromanipulator6000	Characterization		All														Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb) , (Various)	1x4" wafer
Nanospec 210XP nanospec2	Characterization > Reflectometry		All														Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven (White) white-oven	Photolithography > Resist Bake > Oven Bake		Flexible									0 °C - 200 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven 110°C post-bake oven110	Photolithography > Resist Bake > Oven Bake > Resist Post Bake		All									110 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)

Pages